The RG400 and RG214 are both 50-ohms. RG214 has lower loss. I doubt that
12-ft of RG400 would make any measurable difference.
If you are going to blame the 12-ft of RG400 every time you miss a station
in a pileup then don't use it.
----------------- Wes Attaway (N5WA) -------------------
1138 Waters Edge Circle, Shreveport, LA 71106
--- 318-393-3289 (Cell) ---
Computer Consulting and Forensics
-------------- EnCase Certified Examiner ---------------
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Wayne
Kline
Sent: Friday, October 17, 2014 3:00 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Inner station RF feed lines
OK another dumb question.. I have a 100 ft spool of Alpha RG400 and about
60 ft. of Belden RG 142.
I have used pieced B-4 for some Radio /AMP Amp Wattmeter and radio BPF
box.
With 9 RG 214 jumpers coming from the outside shack BOX to the
distribution/ground panel.
What's the thought on using it to the 6X2 box and then to the amps ect ?
longest run would be 12 ft
Or should I stick to the RG214 ?
Wayne W3EA
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|