That depends on your soil conditions. Some of us have shale, rock and/or
hard clay making it impossible to push in a full 8' ground rod.
John KK9A
To: towertalk@contesting.com
Subject: [TowerTalk] Fwd: Cad welding vs clamps
From: Hans Hammarquist via TowerTalk <towertalk@contesting.com>
Reply-to: Hans Hammarquist <hanslg@aol.com>
Date: Thu, 23 Oct 2014 23:14:01 -0400
What would work if you bury it deep enough. I would believe 8 feet of strap
buried 4 feet down should be equal to an 8 foot rod pushed down 8 feet.
Any comments?
I do think it is less work to push the rod down than to dig a trench for the
strap.
Hans - N2JFS
-----Original Message-----
From: Drax Felton <draxfelton@gmail.com>
To: <towertalk@contesting.com> <TowerTalk@contesting.com>
Sent: Thu, Oct 23, 2014 7:38 pm
Subject: [TowerTalk] Cad welding vs clamps
What if one were not to use a ground rod and just bury the strap?
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|