I have done this at 100 watts, with a dinky little panel-mounted
toggle switch. You could probably use a wall switch or a relay
at high power. I have used a 3-way wall switch to make a
2-position antenna switch for high power.
Dave Hachadorian, K6LL
Yuma, AZ
-----Original Message-----
From: Tom Osborne
Sent: Monday, December 29, 2014 2:23 PM
To: towertalk@contesting.com
Subject: [TowerTalk] 40/80 stub
Hi All
It is possible to make a ~23' stub with a switch in the end to
open and
short for 20/40. Can you do this with 40/80 by making an 80
meter stub
and put a switch on the end like the 20/40? I've never seen this
done.
I have a 40/80 elevated vertical I'd like to put a stub on.
Thanks and 73
Tom W7WHY
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|