Ground rod drivers that fit demolition hammers and jack hammers are also
commercially available for around $50-$60.
John KK9A
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Fw: w7ekb & ground rods
From: Patrick Greenlee <patrick_g@windstream.net>
Date: Tue, 20 Jan 2015 09:11:54 -0600
I read the English gentleman's reference and his is good stuff but in my
case I am using a demo hammer not a drill. No rotary motion just hammer
blows and no drill type chuck so the referenced adapter is not useable. It
is easy to make an adapter by using a chisel made for the demo hammer,
cutting off the chisel tip and welding on a piece of conduit or pipe to
form a cup so the "business end" of the tool does not slip off the ground
(earth) rod.
Patrick
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|