I'm working on the station of a client and I find that we may have an issue
with a Yaesu G-2800 rotator. I'm wondering if anyone on TT has resistance
values for the individual wires (6) to the rotator?
Also, the Yaesu control box has a 6 pin female connector (Cinch Jones type) on
the back that the mating plug goes into to feed the rotator. This connector has
two rows of three pins each. One Pin is oriented 90 degrees from the others, so
I'm assuming that this is pin #1.
However neither connector is marked in any way with the pin numbers. I even
removed the shell of the male connector and found no markings on the inside
either. Therefore I don't know the numbering scheme for these connectors.
Any info greatly appreciated!
73, Stew K3ND
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|