If you needed to choke an already-connectorized RG-8-size cable, you could use
a pair of Biggest Clamp-on, mix-31 ferrites.
The two clamp-ons would be not far off in price from a stack of five or six
2.4” OD cores, plus you wouldn’t be sacrificing two PL-259s (if you had to cut
one off and re-attach another after making the choke).
You should be able to get three turns on each for a total of six turns.
With RG-8X, you can get 7 or 8 turns on each.
73, kelly
ve4xt
> On Dec 2, 2015, at 10:21 AM, Jim Lux <jimlux@earthlink.net> wrote:
>
> On 12/2/15 7:30 AM, Jim Thomson wrote:
>> Date: Mon, 30 Nov 2015 15:11:19 -0800
>>
>>
>> Have you considered using a 2.4" toroid core(s) and running multiple
>> turns of the coax through it. I can get about 10-12 turns of 1/4"
>> diameter coax (RG58 type) through those cores. I think you can get 3-5
>> turns of 0.405" coax (RG213 type) through it.
>>
>> There's a fairly decent cookbook for this kind of thing, with all the
>> measurements on actual chokes, etc. in Chapter 7 of
>> http://www.audiosystemsgroup.com/RFI-Ham.pdf
>>
>> ## You can easily get 7 turns of RG-213U through 2.4 inch OD cores.
>> Ditto with RG-393.
>> To make for a more compact balun assy, 3-8 cores can be positioned on
>> either side, like
>> binocular fashion, then tightly wound...if using RG-213U or RG-393.
>
> if there's no connector on the coax<grin>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|