Towertalk
[Top] [All Lists]

Re: [TowerTalk] Fair rite materials for choke baluns

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Fair rite materials for choke baluns
From: jimlux <jimlux@earthlink.net>
Date: Tue, 5 Jul 2016 10:43:59 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On 7/5/16 9:49 AM, Steve Hunt wrote:
Jim,

I worried that the choke impedance might be too high to be matched by
the tuner, but my TenTec 238 matches that Type 52 choke easily from 7MHz
thru 30MHz, including resonance where its impedance is over 12,500 Ohms.

Steve G3TXQ



As long as you can measure the voltage and current, then the fact that the tuner is providing substantial reactive power to the circuit probably isn't a problem.

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>