Towertalk
[Top] [All Lists]

Re: [TowerTalk] Stainless Steel and Other Hard To Find Fasteners

Subject: Re: [TowerTalk] Stainless Steel and Other Hard To Find Fasteners
From: Matthew King - KK4CPS <KK4CPS@gmail.com>
Reply-to: KK4CPS@gmail.com
Date: Sat, 9 Jul 2016 16:12:29 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I've ordered many stainless fasteners through Albany Fasteners for my
transmission line devices.

Their service is second to none, and they ship quickly and reasonably.

I tried very hard to beat their prices and could not do so on the items
that I needed. They had all but one item that I needed, but that is all
that was missing on a list of 30 different fastener types.

Definitely a thumbs' up from me!

73

Matt
KW4VY



On Sat, Jul 9, 2016 at 3:38 PM, Don W7WLL <w7wll@arrl.net> wrote:

> MSCdirect for the 10-24 (303 or 18-8) coupling nut was $5.52 ea vs $1.02
> for Albany (304). Shipping cost was not determined since I had to register
> and I didn’t desire to do that, but a 4 bucks a unit higher cost (I needed
> 4) that was some $17.20 difference!!!!.
>
> McMaster for the 10-24 (316) coupling nut was $7.72 ea vs $1.02 for Albany
> (304). Shipping was $2 more than Albany. Part savings alone for 4 ea would
> be $26.40!!!!!
>
> THOSE are significant differences for SS (where type is not important for
> the project at hand).
>
> I would guess the costs are higher at the two big houses because of the
> massive inventories of other types of items they carry which must be
> covered as well.
>
> But, they are reliable and known sources, along with Bolt Depot (3 bucks
> per unit higher) and other good sources.
>
> Pays to shop albeit I admit one needs to consider all the facts and that
> the cheapest price does not always mean the best deal.
>
> Don W7WLL
>
> From: Jim Miller
> Sent: Saturday, July 09, 2016 12:09 PM
> To: Don W7WLL
> Subject: Re: [TowerTalk] Stainless Steel and Other Hard To Find Fasteners
>
> other good sources in general:
>
>
> MSCdirect.com
>
> mcmaster.com
>
> On Sat, Jul 9, 2016 at 2:48 PM, Don W7WLL <w7wll@arrl.net> wrote:
>
>   Was looking for a source for some SS 8-32 and 10-24 coupling nuts.
> Searched the internet and  ran across a place back east (from me) which I’d
> not heard of, Albany County Fasterners. They had an very interesting
> selection of SS fasteners among other types of materials. Also have a line
> of brass and silicon bronze and a line of security fasteners which are hard
> to find out here.
>
>   Compared the cost of the items and the shipping cost and found them to
> be better than I could find at other well known fastener houses.
>
>   Placed the order, they shipped same day.
>
>   This is a new fastener source I will keep at the top of my list.
> Difficult to drive to a hardware or marine supply store who carries SS
> fasteners for less than what the Albany shipping cost was.
>
>   Just another source you might want to look into. Had not seen it pop up
> on this site before.
>
>   Don W7WLL
>   _______________________________________________
>
>
>
>   _______________________________________________
>   TowerTalk mailing list
>   TowerTalk@contesting.com
>   http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>