thanks for the replies
i am not good on that, but I have a AIM4170
Just need to know how to use it to measure the cable lenght
I dont have a conector on the AVA7-50
thanks,
Jorge
2016-09-10 14:49 GMT-03:00 Bryan Fields <Bryan@bryanfields.net>:
> On 9/10/16 1:28 PM, Zivney, Terry wrote:
> > You can make a good estimate of the length with a digital capacitance
> > meter. The spec sheet for the coax gives pF per meter so you can make a
> > pretty accurate guess.
>
> An o-scope with a TDR would be the best method. This would get you a
> length to
> within a few inches.
>
> The other option is to calculate it out using a spool cable equation.
> This is
> less accurate.
>
> --
> Bryan Fields
>
> 727-409-1194 - Voice
> http://bryanfields.net
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
--
73,
Jorge
CX6VM/CW5W
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|