Hi
Try to boil some hot water, fill into a big cup with a teaspon baking soda,
fill this into the tube parts.
Best Regards,
Stein-Roar Brobakken
LB3RE K3RAG
www.lb3re.com
post@lb3re.com
> Den 9. mai 2017 kl. 02.21 skrev Dave Thompson <thompson@mindspring.com>:
>
> I got a big box of material from MFJ/Cushcraft and some hardware is missing
> but I can get that locally but the driven element for my old 402-CD (old
> version) broke off about 3 inches from the center insulator. The insulator
> is formed for the 1.25" aluminum to fit inside. The broken piece is stuck
> and won't budge. Any ideas on how to get it out so I can install the new
> aluminum?
>
> Don't know if MFJ/Cushcraft still has the insulator so I may be looking for a
> broken 402-CD that had a good insulator.
>
> 73 Dave K4JRB
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|