Towertalk
[Top] [All Lists]

Re: [TowerTalk] HyGain 155CA dampening rope

To: "john@kk9a.com" <john@kk9a.com>, towertalk@contesting.com
Subject: Re: [TowerTalk] HyGain 155CA dampening rope
From: W4AAW@aol.com via TowerTalk <towertalk@contesting.com>
Reply-to: W4AAW@aol.com <W4AAW@aol.com>
Date: Thu, 22 Jun 2017 09:29:08 -0400
List-post: <mailto:towertalk@contesting.com>
1. The good quality screw clamps never rust.

2. The good quality screw clamps never rust.

Bob is right about stainless.  

My yagis, erected in 2001 just got a thorough inspection.  All of the 
all-stainless clamps about 20 on each antenna were in perfect shape.

Plated hardware?  Meh.

That's my experience.  Have built all my antennas since 1963.  

Others may disagree.

73 Mike W4AAW

----- Reply message -----
From: "john@kk9a.com" <john@kk9a.com>
To: <towertalk@contesting.com>
Subject: [TowerTalk] HyGain 155CA dampening rope
Date: Thu, Jun 22, 2017 8:43 AM

Why would the screw clamp have any effect on the elements braking?  The
parts website seems to indicate that HyGain uses 0.028" wall thickness on
their 20m element tips.
http://www.hy-gain.com/Product.php?productid=174939.

John KK9A



To: "Bill Parry" <bparry@rgv.rr.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] HyGain 155CA dampening rope
From: "Bob Shohet, KQ2M" <kq2m@kq2m.com>
Date: Thu, 22 Jun 2017 07:47:51 -0400


Bill,

Did you use the stock Hygain screw clamps at the end of the telescoping
elements or did you use stainless steel hoseclamps like I do?

73

Bob  KQ2M

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>