Towertalk
[Top] [All Lists]

Re: [TowerTalk] Stacking Cushcraft A50-3S under A3S

To: Bill Coleman <aa4lr@arrl.net>
Subject: Re: [TowerTalk] Stacking Cushcraft A50-3S under A3S
From: Michael Clarson <wv2zow@gmail.com>
Date: Tue, 10 Oct 2017 09:58:32 -0400
List-post: <mailto:towertalk@contesting.com>
Bill: Check the following article on close spacing dissimilar yagis.
It will make you feel better! --Mike, WV2ZOW
http://www.wa5vjb.com/references/stacking_Dissimilar_Antennas2.pdf

On Mon, Oct 9, 2017 at 5:16 PM, Bill Coleman <aa4lr@arrl.net> wrote:
>
>> On Oct 9, 2017, at 1:45 AM, Marv Shelton <marvs@att.net> wrote:
>>
>> The rule of thumb is ½ the wavelength of the highest freq. band so about 9.5 
>> would keep the HF antenna out of the capture area of the 6m beam but of 
>> course the opposite would not be true.  The 6m beam would be in the capture 
>> area of the HF antenna.
>> The best advice is to put them as far apart as you can and still remain 
>> within the safe working parameters of your mast, rotor, and tower.
>
> Well, six feet is all the mast length I have to work with — that’s as far 
> apart as I can put them….
>
>
> Bill Coleman, AA4LR, PP-ASEL        Mail: aa4lr@arrl.net
> Web: http://boringhamradiopart.blogspot.com
> Quote: "Not within a thousand years will man ever fly!"
>             -- Wilbur Wright, 1901
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>