Towertalk
[Top] [All Lists]

Re: [TowerTalk] 80 Meter yagi question

To: towertalk@contesting.com
Subject: Re: [TowerTalk] 80 Meter yagi question
From: Grant Saviers <grants2@pacbell.net>
Date: Wed, 11 Oct 2017 15:33:36 -0700
List-post: <mailto:towertalk@contesting.com>
My 80m antenna evolution near Seattle, evolved over 4 years after moving there.

1. Two 80/40/20 fan dipoles at 90 degrees @65' - Very good F/S on 20 & 40. Not much on 80m. V. Hard to get EU DX from Seattle on 80m.

2. Tornado tuned 86' long 80m rotatable dipole @ 100'. A few db F/S, somewhat better as a DX antenna. Europe still hard. Well behind other west coast DXers at AM grey line LP.

3. Two element JKantennas 80m beam, loading coils, 100' long elements @ 157'. Now in the ballgame with other top Northwest stations AM grey line to EU (if the EUs are there). The beam has enough F/S that I can easily hear/work VK/ZL/S. Pacific when the woodpecker is wiping out JA's. High 3 element 80m yagis at good sites are an s unit better, and one 4L wire beam in WA at 190' is the absolute king of the hill EU LP, talking and hearing.

4. Only dreaming of more/different receive antennas for the future. Also hoping more EU stations get on the air for our AM grey line.

My 4sq DX Eng receive antenna is about a wash on 80m with the beam. It beat the 80m dipole 80% of the time. The receive 4 sq always wins on 160m vs my T loaded vertical.

So height is very important for horizontal antennas on 80m. IMO (from my QTH) it is not worth the trouble for a rotatable 80m antenna below 110' or so. They really start to work at 1/2 WL, 130'. Every 10' higher is noticeable. Modeled them all and NEC concurs. 4 sq squares are also v. good, and maybe things like a Bruce or phased loops might yield enough gain at a low angle. Or it is FT8 or JT65 to make the Q.

When I lived in MA, it was boring to work all of EU SSB with a 50' high 80m dipole. The WWA to EU path length (v. long SP, REALLY long LP), competing stations (East Coast wall), arrival elevation angles (7 to 15 deg), and auroral hole (right in the way) make a huge difference in what is needed for an 80m antenna.

Grant KZ1W

On 10/11/2017 10:11 AM, Jim Thomson wrote:
Date: Mon, 9 Oct 2017 10:17:37 -0700
From: Jim Brown <jim@audiosystemsgroup.com>
To: towertalk@contesting.com
Subject: Re: [TowerTalk] 80 Meter yagi question
Message-ID:
<2f079a2a-ae46-4d37-3abd-c42602de55aa@audiosystemsgroup.com>
Content-Type: text/plain; charset=utf-8; format=flowed

On 10/8/2017 12:18 PM, john nistico wrote:
I am thinking of adding a rotatable 80 meter YAGI on one tower. Any suggestions?
<Hi John,

<As the first part of your thinking about this, I strongly suggest that
<you study my applications note on this topic. The most important
<conclusion is that height of a horizontally polarized antenna is VERY
<important on 80M. Figuring out a way to get a simple dipole (or pair of
<dipoles) HIGHER is about as effective as a two-element Yagi. I've had
<great success with two dipoles up 130 ft or so at right angles to each
<other. The same physics applies whether the antennas are full size or
<loaded.

<http://k9yc.com/AntennaPlanning.pdf

<73, Jim K9YC

##  He did not say how high the proposed 80m YAGI  is.   Steve,  VE6WZ
had his hb  2 el 80m yagi  up 100 feet... on a 50 foot wide postage sized city 
lot.
Used  66 ft long eles  on 80m, with hb center loaded cu tubing coils.
The only place he could install the UST HDX-589  tower was next to his deck..
which put it exactly  14 ft away from his property line.   So he made the boom 
28 ft long.
He also interlaced his  2 els on 40m..on the same boom.   He is  working EU on 
SSB
like a machine gun, late at night.... their sun rise.   He has NO trees 
anywhere.    That array of his
is extremely effective, FB is superb across the band. Box at both feedpoints is 
more .25 inch cu
tubing coils and vac relay switched for cw + ssb.

##  A local fellow, aprx 30 miles north of me, has 2 x dipoles on 80m, at right 
angles..and both
up 110 feet.  But he is on acerage, and has loads of 120 ft tall douglas fir 
trees.  He shot a line over
4 of em..and the rest is history.   Very effective array on 80m.

##  One big advantage of dipoles and yagis is they are quiet on RX.   You 
require one heck of a lot of
real estate for either a single vertical or a  4 square.  Sure they work good 
on TX.... but they also require
a dedicated RX ant array..and thats where the issue starts up.  Tough to get 
the dedicated RX ants away from the
TX verts.  That or the TX verts have to be de-tuned on RX..pita.

##  You dont hear of  many  40m  4 square arrays these days.   A simple 2 el 
rotary yagi at a reasonable height,
like  70 ft or higher, will typ trounce the 40m 4 square.

##  regarding the infamous seco systems Tornado drive, if you buy one of these 
superb devices,  order it
with the plastic coated, .25 inch OD   copper  tubing coils.... vs the plastic 
coated .25 inch OD  aluminum tubing coils.
A single 12 vdc motor  simultaneously   expands or compresses   BOTH coils.   
He can build them  to any uh range you desire.
But the caveat is.... they have a 2:1  max  to min uh range.  Mine are 6.25 uh 
to 12.50 uh.    He can build smaller ranges than
this, and also a lot bigger ranges.   He can also build  a   SINGLE 
compressible / expandable coil.... like for the base of a vert.

##  Aluminum only  conducts  60% as good as copper.  .25 inch OD copper  =  
.417 inch OD  aluminum.
The tornado drives are controlled with a screw driver controller. MFJ and also 
Ameritron makes the controller.
Both are identical, except for the name on them.  The Ameritron version is 
called a SDC-102.    It comes with a digital
readout turns  counter..and also 10 x pre – sets.  Also comes with manual up / 
down  controls.   Just bring up the closest
pre-set, then  manually tune  up /down  for flat swr from  3500-4000 khz.

##  Since I have  2 x digital LCR meters,  I wired one meter to coil  # 1....  
and the 2nd meter to coil #2.  Then varied the uh
from min to max.   They both tracked identically from min to max uh.   Zero 
issue with the compressible coils, since there is
NO sliding contacts or wheels like on a  roller inductor.  And no, you cant 
blow em up with serious QRO either.  All  that is required
is a tubing type helical hair pin.. + a heavy duty  CM choke.

Jim   VE7RF

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>