Towertalk
[Top] [All Lists]

Re: [TowerTalk] Yagi Optimizing Software

To: Jeff <keepwalking188@ac0c.com>, Ray Conrad NM2O <nm2o@outlook.com>, "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Yagi Optimizing Software
From: Máximo EA1DDO_HK1H <ea1ddo@hotmail.com>
Date: Mon, 20 Nov 2017 18:20:42 +0000
List-post: <mailto:towertalk@contesting.com>
It is quite funny to see how in the states side most/all hams use Eznec.

And in EU most use Mmana (entry and medium level) and 4NEC2 (medium and high 
level). Some EU hams use Eznec as well.


>From my point of view, I have Eznec in my computer, and I used time to time, 
>but lacks two key points; no optimizer machine, and it is not able to plot 
>gain/impedance for a range of frequencies.


By the way, 4NEC2 opens Eznec files as well.

________________________________
De: TowerTalk <towertalk-bounces@contesting.com> en nombre de Jeff 
<keepwalking188@ac0c.com>
Enviado: lunes, 20 de noviembre de 2017 17:28
Para: Ray Conrad NM2O; towertalk@contesting.com
Asunto: Re: [TowerTalk] Yagi Optimizing Software

MMana-GAL has basic optimizing and it's very popular in EU - freeware.  I
learned modeling using MMANA but eventually stopped using it because
everyone that I talked too used EZNEC and getting help with use or design
was hard as they did not know MMANA.

AutoEZ is an Excel-based toolset serving as a front end for EZNEC.  Somewhat
more of a learning curve than MMANA but you can do just about anything you
can imagine with the pair.  Small fees for both EZNEC and AutoEZ.

73/jeff/ac0c
www.ac0c.com<http://www.ac0c.com>
Home [www.ac0c.com]<http://www.ac0c.com/>
www.ac0c.com
Why Your Filter is Not Working. Have technology from space aliens & NSA - yet I 
still can't filter the guy up the band! A Couple of SX-101A Plots


alpha-charlie-zero-charlie

-----Original Message-----
From: Ray Conrad NM2O
Sent: Monday, November 20, 2017 11:22 AM
To: towertalk@contesting.com
Subject: [TowerTalk] Yagi Optimizing Software

I have used YO in the past with good results.

It's still available on an old DOS computer.


What current software has optimizing routines?

I have older versions of YW and EZNEC.

I don't see optimizing routines in either.


73,

Ray

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
TowerTalk Info Page - 
Contesting<http://lists.contesting.com/mailman/listinfo/towertalk>
lists.contesting.com
TowerTalk is for discussion of tower and HF antenna construction topics. TT 
members have lots of helpful information and are happy to share it.



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
TowerTalk Info Page - 
Contesting<http://lists.contesting.com/mailman/listinfo/towertalk>
lists.contesting.com
TowerTalk is for discussion of tower and HF antenna construction topics. TT 
members have lots of helpful information and are happy to share it.


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>