Yes, all of my Polygon rod was UV stabilized
73
Tim
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
jimlux
Sent: Tuesday, March 06, 2018 4:04 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] pultruded/polygon rod
On 3/6/18 10:52 AM, Tim Duffy wrote:
> Hello Steve
>
> At one time I used polygon rod on all my towers. After having a polygon
rod
> break (mid span) I have started the conversion process to Phillystran for
> all of my tower guys.
>
> Even under the best of circumstances Polygon rod must be replaced every 6
to
> 8 years due to the fragmenting of the fiberglass (the UV model).
>
> 73
was your polygon rod claimed to be UV inhibited?
One big difference between guywire duty and my structural stuff is that
the guywires see a lot of oscillatory loads, both in tension, and
transverse. That might aggravate degradation.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|