Perhaps Newark?
https://www.newark.com/c/passive-components/emc-rfi-suppression/ferrites-ferrite-assortments/cylindrical-core-ferrites
73,
Joe kk0sd
-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of Mike Lyon
Sent: Monday, October 8, 2018 9:56 PM
To: k4to@arrl.net
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] Ferrite cores
Did you check DX Engineering?
On Mon, Oct 8, 2018 at 7:52 PM Dave Sublette <k4to.dave@gmail.com> wrote:
> Well I've done it again -- I lost the info on where to order the 1.5
> inch type 31 toroids to use when building chokes to feed antennas. I
> have googled all evening, looked at Mouser, Amidon, etc... and can't
> find them, What really irritates me is I bought them and built three
> chokes not three months ago and can't remember where i got them from.
> :-( Old age is agravating.
>
> Who can tell me the good supplier for type 31 1.5 inch diameter cores
> to wrap RG142 around?
>
> Thanks,
>
> Dave, K4TO
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
--
Mike Lyon
mike.lyon@gmail.com
http://www.linkedin.com/in/mlyon
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|