On 5/3/20 9:28 AM, john nistico wrote:
>>> I modeled a 2 element 20 meter wire beam on a 10 ft boom.
You might try opening EZNEC sample model 20M5ELYA.ez. That's a
typical 5-element 20m beam with stepped diameter tubing. (EZNEC uses
"stepped diameter" for telescoping aluminum tubes because "tapered
segments" has a different meaning.)
You could delete wires 23-55 and you'd be left with 2 elements on a 6
foot boom. Then start experimenting from there.
Dan, AC6LA
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|