[TowerTalk] UST NOT RAISING

[Joe via TowerTalk <towertalk@contesting.com>]

SOUNDS to ME that the BELT between the MOTOR & Reduction needs to be 
tightened!!!JUST RAISE the MOTOR with the FOUR BOLTS holding the Motor in place 
to TIGHTEN the BELT - I LEARNED the LESSON the HARD WAY.
IF the motor DOES NOT 'ENGAGE' the Belt and THEREFORE the REDUCTION GEAR 
PULLEY, the FUSE WILL BLOW!!!
MY 2 cents..  YMMV
73
Joe  K5KT
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk