Give Ken at JK a call, Nobody knows the 402T better and he will model it
for you to get a solid answer. May be better replacing the TH11 with a JK
Mid Tri 40 to eliminate stacking distance issues.
Ron, WV4P
On Wed, 8 Jul 2020 at 12:08, John Simmons <jasimmons@pinewooddata.com>
wrote:
> I'm sure this has been covered before, but a search of the archives
> didn't turn up anything.
>
> I have 80' of 25G, well guyed, and a TH11 at the top turned by a T2X.
> I'd like to add a 40M beam, something along the order of the JK402T. The
> wind loading would max out the tower and the rotor. I'm assuming the two
> yagis would be at 90 degrees to each other. What sort of spacing between
> the two do I need? Surely others have been down this road.
>
> Please comment!
>
> --
> 73,
> -John NI0K
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|