I agree Wilson. To make it clearer, lets refer to it as an axial load.
Bob
K6UJ
> On Dec 26, 2020, at 10:34 AM, Wilson Lamb <infomet@embarqmail.com> wrote:
>
> Why can't we get the terminology right?
> THRUST BEARINGS take THRUST loads, along the axis of a shaft, like a ships
> propeller shaft.
> I don't know if there's a specific name for radial support bearings, but they
> are the one's we have all around us, like in your car engine or BBQ spit.
> Yes, a thrust bearing will take up some radial load, but it usually isn't
> meant to.
> There are combination bearings, like the tapered roller bearings in your car
> wheel.
> A radial support bearing, if not built as a combination, won't be happy with
> much thrust load on it.
> Think of a ball bearing on its side. Thrust is driving the balls between the
> races, like a wedge, which will eat the races out on one side and eventually
> drive the balls out the side, if the outer race doesn't snap first.
> The Rohn sleeve won't take any axial load at all.
> To have a thrust bearing at the top of your tower you must have robust
> setscrews driven into the side of the mast very firmly, ideally in dimples.
> The screws may be in the top of the bearing assembly or in a collar around
> the mast.
> The screws must transfer the whole thrust load to the bearing's top race,
> then the balls/rollers transfer the load to the bottom race which transfers
> it to the tower.
> Yes, many thrust bearings use balls, but the races are horizontal. Two
> plates with marbles between would be way to think of them.
> I KNOW this is all old hat and obvious, but I've been pained by the misnaming
> on here for at least 15 years.
> Now it's off my chest...HAPPY NEW YEAR,
> Wilson
> W4BOH
>
> https://itstillruns.com/types-universal-joints-7456638.html
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|