Towertalk
[Top] [All Lists]

Re: [TowerTalk] outdoor junction shelters

To: John Simmons <jasimmons@pinewooddata.com>
Subject: Re: [TowerTalk] outdoor junction shelters
From: George Dubovsky <n4ua.va@gmail.com>
Date: Wed, 20 Jan 2021 10:24:45 -0500
List-post: <mailto:towertalk@contesting.com>
Well, John, I have measured the functional equivalent. I once ran a piece
of coax on the ground to a 160 rx array element. It was in the Fall and I
didn't notice that it ran by the front door of a groundhog's Winter home.
Come Spring, the whistle pig emerged and took offense at the coax and
proceeded to chomp a foot-long section to where it was just the center
conductor and the barest hint of braid. Before I scrapped it out, I put it
on the VNA and measured the performance at 1.8 MHz. If I wasn't concerned
about the aesthetic and environmental issues, I could have put it back in
rx service on 160 meters...;-)

I believe VE1ZZ was using CATV hardline on the lowbands also, and that was
the gist of the QST article.

73,

geo - n4ua

On Wed, Jan 20, 2021 at 10:07 AM John Simmons <jasimmons@pinewooddata.com>
wrote:

> Argh! Blasphemy!
>
> Anybody TDR such a splice?
>
>
> --
> 73,
> -de John NI0K
>
> Paul Christensen wrote on 1/20/2021 7:05 AM:
> > VE1ZZ did the same.  See p. 31, Feb. 1996 QST.
> >
> > Paul, W9AC
> >
> > -----Original Message-----
> > From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of K9MA
> > Sent: Wednesday, January 20, 2021 7:52 AM
> > To: towertalk@contesting.com
> > Subject: Re: [TowerTalk] outdoor junction shelters
> >
> > The late W0AIH used to splice hard line by bending the two ends upwards,
> connecting the shields and center conductors, and slipping a plastic soda
> bottle over the whole thing.  Ugly, but cheap.
> >
> > 73,
> > Scott K9MA
> >
> >
> >
> >
> > On 1/20/2021 5:07 AM, Rob Atkinson wrote:
> >> Interesting item I came across that looks as if it might help keep
> >> feedline splices and other junctions outside dry.
> >> https://www.amazon.com/dp/B089XVCC21  My experience has been the best
> >> way is to shield a junction directly from precip., but also provide
> >> drain or evap. holes so the interior doesn't fill up with water from
> >> condensation.
> >>
> >> 73
> >> Rob
> >> K5UJ
> >> _______________________________________________
> >>
> >>
> >>
> >> _______________________________________________
> >> TowerTalk mailing list
> >> TowerTalk@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/towertalk
> > --
> > Scott  K9MA
> >
> > k9ma@sdellington.us
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>