The only sensor you need up on the tower is an anemometer. since wind
speed varies with HAAT. Get a wired (not wireless) one to avoid having
batteries at the unit. Leave the WX station on the ground for the other
readings, including ground wind speed. You would want that in addition
to wind speed at the top of the tower.
Hazers are very fussy things that you should avoid if at all possible.
--
Rick Karlquist
N6RK
On 2023-01-31 08:21, Rick Harrington N0VT wrote:
> I would like to have the sensing unit of my home weather station near the top
> of my tower (80'). But instead of a fixed installation, I'd like to be able
> to raise/lower it via rope & pulley for battery changes, cleaning etc. There
> would have to be a way at the top of the tower to dock it into the same
> north/south orientation each time. (I'm thinking of some sort of small
> hazer-like contraption.)
>
> Has anyone ever done this, or seen info on doing it?
>
> 73,
>
> Rick N0VT
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|