Maybe it is an issue with the coax. I will have to go look the maker
and specs. I don't know what other connectors to use. I use the
appropriate stripping tool with a compression F connector. I will
have to check the other connectors at each antenna and see if they are
doing it too. I suppose I could try a different brand of compression
connectors.
W0MU
On 5/22/2024 6:34 PM, Richard (Rick) Karlquist wrote:
I have seen this phenomenon many times with RG8 using type N connectors
The only solution I know for that case is to switch to UHF connectors
don't allow the dielectric to move relative to the center conductor.
Does anyone else understand this behavior?
Rick N6RK
On 5/20/2024 7:41 PM, Mike Fatchett W0MU wrote:
I have a circle 8 array and the center dielectric seems to grow
after I put connectors on. Enough that the connector works itself
off the switching unit. There is at least 1/2 to 3/4 of an inch
coming out past where it should on the connector. I am using
quality compression connectors. Do I need to stretch this coax
out? I don't recall the brand but I think it was decent quality
cable. Has anyone else seen this?
W0MU
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk