Times says the jacket on LMR-600-UF is TPE. A web search turned up this,
among others:
https://automation-insights.blog/2015/06/24/which-cable-jacket-is-best-for-your-application/
On 6/21/24 10:47, jim.thom jim.thom@telus.net wrote:
Does anybody make a version of LMR-600UF that has a decent outer jacket on
it....like what's used on RG-213U ??
The outer jacket on LMR-600UF is super soft rubber, prone to knicks and
abrasion, and does not seem to be UV resistant.
Plan B is to use use 2" wide electrical tape, and cut it into say 24-30"
lengths, and run the tape inline with the LMR-600UF, then wrap it around
the coax jacket. Then the next 24-30" etc, etc.
This is for a crank up tower, and no, I don't want to use LMR-400UF or
213-U.
Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
--
Art Greenberg
WA2LLN
art@artg.tv
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|