[Top] [All Lists]

[TRLog] TRLog & Packet

Subject: [TRLog] TRLog & Packet
From: (
Date: Wed, 05 Mar 1997 09:21:03
Hi all---

Question re TRLog and Packet. Using V5.96, computer is 386/20 with 
13 MB. Packet program is KaGold V9.06. Logcfg defines packet port 
as Com2 and radio control port as Com1, using LPT1 for keying. Rig 
is TS940S.

Set up is Start KaGold, log onto cluster, exit from KaGold with the 
"keep connects" option. Start TrLog, CTRL-B to view packet. Works 
just fine for received spots etc.... attempts to send via packet 
are ignored however. Should I not be able to type something useful 
like sh/wwv while packet window is open and have it sent. Right 
now, nothing happens.

I just finished fighting through installation of new stuff in 
computer like SCSI drives and getting multiple com ports and 
parallel ports running successfully but I am not an expert when it 
comes to serial communications.

Any suggestions, advice, and/or magic bullets gratefully 

TIA & 73, Bill, W1HIJ
Newport Beach, California, USA

FAQ on WWW:     
Administrative requests:
Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA

<Prev in Thread] Current Thread [Next in Thread>
  • [TRLog] TRLog & Packet, <=