TRLog
[Top] [All Lists]

[TRLog] TRLog & KPC3 Packet

Subject: [TRLog] TRLog & KPC3 Packet
From: w1hij@contesting.com (w1hij@contesting.com)
Date: Tue, 11 Mar 1997 16:42:03
MANY THANKS TO ALL (literally from all over the world, actually I 
almost made WAC) who responded to my question about packet 
problems...

It's now fixed---the solution was two-fold---a hard reset for the 
KPC-3 (apparently KaGold leaves some undesirable settings of 
parameters as far as TRLog is concerned) and the use of the EIGHT 
BIT PACKET PORT = TRUE command.

Anyway it's now fixed and the same solution took care of a similar 
problem in WJ2O's program which I use for non-contest logging.

LOGCFG.DAT relevant parts:

PACKET PORT = Serial 2
PACKET BAUD RATE = 1200
EIGHT BIT PACKET PORT = TRUE
PACKET SPOTS = ALL

(Lines follow immediately after similar lines for TS940 control.)

Now if I can only figure out how to disable the beeper in the 940!

TNX AGN, Bill, W1HIJ

Newport Beach, California, USA


--
FAQ on WWW:               http://www.contesting.com/trlogfaq.html
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA

<Prev in Thread] Current Thread [Next in Thread>
  • [TRLog] TRLog & KPC3 Packet, w1hij@contesting.com <=