Just got this from VE6JY:
> Yep, that BROADCAST parameter was the culprit...behaves normally off the
> network, and just had it running with 4 computers and the spots are
> flowing around fine. Still seem to have a little trouble sending commands
> to the cluster (we use Clusse here - a freeware packet cluster clone) but
> will keep experimenting.
> Sorry - I should have caught that parameter myself - it seems obvious
> (now) sending data to non existent links could cause such a lock up....
> Again, thanks for the quick response...
Thanks for getting back with the results so quickly Don! This
problem was also report by N7EX. I hope this posting will prevent
anyone else having the problem. At this time, I do not have any
improvements to release before WPX - unless a show stopping bug is
The next release will have a test for the broadcast and disable it if
there isn't a network port.
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Administrative requests: trlog-REQUEST@contesting.com
Sponsored by: Akorn Access, Inc. & N4VJ / K4AAA