I have the Kenwood TS870 interfaced for frequency and band. Now how do
I get the CW going. Do I still use the Parallel port for this.
In other words are the parallel and serial ports active at the same
I sure wish the program made use of the Kenwood ability to key the
radio via the serial port!
The document says Pin 1 is strobe. What does that mean? What level is
active here? Is this just a ground? It looks like Pin 17 should be
plus w/r to the strobe to close the Xistor. Is that right? It will
still work even though I am using the serial port for the radio
itself. I have RADIO ONE CONTROL PORT = SERIAL 1 in the CFG file.
Gil Baron W0MN email@example.com
Bailar es vivir" pgp2.6 key http://www-swiss.ai.mit.edu/~bal/pks-toplev.html
"Cuatro caminos hay en mi vida. Cual de los cuatro sera el mejor"
[Posted with Agent 1.5. For info, email firstname.lastname@example.org.]
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Administrative requests: trlog-REQUEST@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html