I was having problems but I found an open line in my cable. I now tie
pin7 to pin 8 at the radio CTS/RTS and open those lines to the
computer. Pin 7 remains open and works for PTT and pin 4 works for
the CW. Both of those lines are cut so they don't go to the radio. Pin
5 is ground and is left connected.
I tried killing power in the middle of testing and lost no logs data.
It must be backed up after every qso which I LIKE a LOT. I do wish
that the write to floppy happened immediately and also the printing
rather than being 5 qsoes behind. Nevertheless, it seems you don't
lose any even with a power failure. Good Job!
Gil Baron W0MN firstname.lastname@example.org
Bailar es vivir" pgp2.6 key http://www-swiss.ai.mit.edu/~bal/pks-toplev.html
"Cuatro caminos hay en mi vida. Cual de los cuatro sera el mejor"
[Posted with Agent 1.5. For info, email email@example.com.]
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Administrative requests: trlog-REQUEST@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html