Well mine works just fine but what I have is just a plain serial cable from
the radio to the computer. It connects 1-1, 2-2, 3-3, etc. then for cw
keying I use the parallel port with the interface that I built...real
simple to build and it will eliminate all of your problems.
Might try it. has worked through every contest I have done.
At 01:20 PM 10/30/97 GMT, you wrote:
>I find that if I juste start the program and wait all of the things I
>want to happen are now happening. I did change the response timeout
>line in the config to 50.
>It does take up to 15 seconds or so before the changes are seen.
>With log-eqf the changes are seen in less than one second.
>I think it is because pin 7 RTS is not being used by the program and
>that makes it more difficult to communicate quickly. I would rather
>see that used so that updates would be immediate. I realize that
>leaves no pin for PTT so it is a dilemma. Perhaps it could be an
>option. You would have the choice of PTT from the serial cable or
>I think the answer is that you have no choice but to jumper pin 7 to
>pin 8. I change to that and it seems to update when it must. It still
>(SOMETIMES AT LEAST) does not update until you do something at the
>keyboard but at least it ALWAYS updates then.
>I would much prefer if it would update when you make changes at the
>radio with NO other intervention. Sometimes it does and sometimes it
Check out my home page at http://home.inreach.com/no6x
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Administrative requests: trlog-REQUEST@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html