Hello-
I am trying to use the SDBVP software with TR. However, once I set
the DVP on command in TR, and load the TSR, following the way it is
stated in the manual, I then go to record, and follow the manual's
instructions (TR) for recording. All I get is a 1 second PSST from
the radio as it keys up. I have tried all kinds of cables, redone
them and everything possible to make sure there's no RF. I even went
to the dummy load and used 1 watt.
Some other machine info:
Network Interface Card on IRQ 7
I noticed that SBDVP uses IRQ 7. I've tried changing the network card
to another free port. When I do this SBDVP still doesn't work....
Help!?!!
de n9yxa
========================================
Cedrick Johnson - N9YXA - Z2/N9YXA
10-10: 67368, Soc. Of Midwest Contesters
Aurora, IL 60506-2134
Packet: n9yxa@w9zmr.en52va.il.us.na
DX Cluster Home Node: K9AJ- Crete, IL
========================================
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|