The question is...Since TR can access cards by the I/O address, can a card
be put in a system without assigning it an interrupt? I have a system that
is basically full. If I could not use an IRQ, I wonder if it would work.
This is, of course, in DOS and only because TR can access ports by address
as it does not care about IRQ.
-----Original Message-----
From: CF McGarvey <n2hig@ibm.net>
To: ham-computers@qth.net <ham-computers@qth.net>; kenwood@qth.net
<kenwood@qth.net>; N6tr Reflector <trlog@contesting.com>; wf1b-rtty@wf1b.com
<wf1b-rtty@wf1b.com>
Date: Friday, March 13, 1998 6:22 PM
Subject: [TRLog] Serial Card Multi I/O MULTI IRQ
>Dalco Electronics has a serial/parallel card that has multiple serial ports
(four) with three parallel ports.
>
>They have multiple IRQ's and addresses. Compatible ith the current UARTs.
>
>Perhaps an ideal solution to the comport/irq crunch syndrone.
>
>Part Number 49570 and costs $62.80.
>
>1- 800 445 5342
>
>PS, I am not affiliated with Dalco or any oter commercial enterprise.
>73, Chas
>
> Wyvern Technology, Inc. Dayton Booth #704 Ray Ortgiesen, WF1B
> 35 Colvintown Road http://www.wf1b.com
> Coventry, RI 02816-8509 E-Mail: wf1b@wf1b.com
> Voice (401) 823-RTTY(7889) Fax: (401) 822-0554
> RTTY Contest Reflector: wf1b-rtty-request@wf1b.com
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/trlogfaq.html
>Submissions: trlog@contesting.com
>Administrative requests: trlog-REQUEST@contesting.com
>Problems: owner-trlog@contesting.com
>Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|