On 12 Aug 98, Igor Sokolov wrote:
> One more question: you cannot preview the entire QTC block prior to
> sending it. If you happen to start sending QTC to DL0BD for instance and
> one of the lines in that QTC block is the info about QSO with DL0BD the
> program stops sending all the following lines. It looks like you
> promised to send 10 QTC to your contact in the beginning but then
> changed you mind and sent only 3 or 4. Yet the number that you have sent
> in the beginning says something like 32/10.
I thought in a case like this that CTRL-Q sent "QTC 32/4 QRV?" and
you could only send DL0BD 4 QTCs even if you had 100 available.
That's the impression I got anyway.
> I know, it is probably difficult to overcome but what about letting
> the operator to preview the QTC and use the cursor to move around
> the QTC screen so that unwanted line can be marked "do not send" or
> "repeat this line again" and the header is formed only after
> previewing and marking.
I was wondering about something like this, but I just guessed that
the QTCs must be handled sequentially down the log without a LOT of
re-programming. That's why I thought the program sent 32/4 in the
> Anyway when all goes according to plan - great program. So easy to send
> QTC that you get a real pleasure out of the process. Thank you for the
> best-so-far logging program Tree.
Absolutely. The QTC feature works so well, it makes me wish other
contests besides the WAE had QTCs! :-)
I just wish condx had been better and I had been more motivated to
73 de Lee
Lee Hiers - AA4GA
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Administrative requests: trlog-REQUEST@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html