[Top] [All Lists]

[TRLog] Re:

Subject: [TRLog] Re:
From: (Scott Robbins)
Date: Sun, 16 Aug 1998 16:21:43 -0400 (EDT)

Make sure you are using a standard serial cable and not a null modem
cable (with pin 2 connected to pin 3 and vice versa) - some early
editions of the Omni-VI manual indicated, incorrectly, that pin 2 should
be wired to pin 3 and vice versa for computer rig control.  It should be 
straight serial port, pin 2 to pin 2 and pin 3 to pin 3.

If this is not the solution, give me a call at work during the week at
(800) 833-7373 and I'll look up some of my documentation I have
stashed there to get the radio and TR chatting to each other.

Scott Robbins, W4PA
Amateur Radio Product Manager, Ten-Tec 
(at home on Sunday) 

At 09:51 AM 8/16/98 -0700, you wrote:
>>From  Tue Aug 11 08:26:20 1998
>Subject: BOUNCE    Non-member submission from ["Allan
G. Taylor" <>]   
>>From n6tr  Tue Aug 11 11:26:12 1998
>Received: from ( [])
>       by (8.8.5/8.8.5) with ESMTP id LAA07822
>       for <>; Tue, 11 Aug 1998 11:26:12 -0400 (EDT)
>Received: (from ataylor@localhost)
>       by (8.8.5/8.8.5/LLNL-Jun96) id IAA21464
>       for; Tue, 11 Aug 1998 08:26:08 -0700 (PDT)
>Date: Tue, 11 Aug 1998 08:26:08 -0700 (PDT)
>From: "Allan G. Taylor" <>
>Message-Id: <>
>Subject: OmniVI help for rig control, please!!
>X-Sun-Charset: US-ASCII
>I am in need of some help setting up my OmniVI with TRlog. I have attempted to
>go 'by the numbers', but no rig control yet. I can key it via the parallel
>port, tho. Any elmers out there to help out grampa??!!  I am in the SF Bay
>area, town of Pleasanton CA.
>Grant K7GT
>FAQ on WWW:     
>Administrative requests:
>Feature Wishlist:

FAQ on WWW:     
Administrative requests:
Feature Wishlist:

<Prev in Thread] Current Thread [Next in Thread>
  • [TRLog] Re:, Scott Robbins <=