>>I do this often. Just give TR the serial port of your modem.
>>Use your terminal emulation program (or control-B) to dial
>>up your ISP and then telnet to the cluster (cluster.akron.net
>>works). TR will then just think it is talking to a TNC.
IS> I have tested the above. Does not work for me. I do it in Win95. Start
IS> telnet program (CRT in my case), telnet to one of the sites where feed
IS> from dx summit is available,start to get spottings. I start TRlog in a
IS> dos box and when the program asks for the port where my tnc supposed to
IS> be I give the port where modem is connected (serial 4 in my case). I
IS> continue get spots on telnet app but nothing shows up in TRlog. What do
IS> I do wrong?
Do not use Windows Internet utilities.
Just type Ctrl+B in TR.
or something else to connect your ISP, input login and password, then
Then enter DXCluster. After such long procedure type Ctrl+B again.
This works OK here.
Question to Tree:
If you do this often, maybe simple script will help? Such feature will
be great especially for hams with bad phone lines so they have to
redial ISP very often.
Some of ISPs do not allow telnet to run. Or directly switch on PPP
or SLIP after succesfully entered password...
We can use W95 built-in telnet application or use Netscape/IE. We
can use DXMon or DXTelnet, but there is no possibility to transfer
DX info to TR-LOG.
Nick UT2UZ mailto:email@example.com
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Administrative requests: trlog-REQUEST@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html