TRLog
[Top] [All Lists]

[TRLog] Baud rate question

Subject: [TRLog] Baud rate question
From: kf9yh@netnitco.net (Bob)
Date: Mon, 30 Nov 1998 12:32:45 -0600

----->I just (finally) got TRLog working with my OmniVI. I had to drop
the
>baud rate to 4800 for it to work. As the rig can handle 19200 (as can
>my main std logging program LOG-EQF), I was quite surprised that
trlog
>couldn't. Am I missing something here? Is there an update that can
>handle the higher date rates?
>--
>Grant Taylor  K7GT  Pleasanton/Livermore CA  k7gt@qsl.net


Hello, Grant. The big difference is that TR does everything withou
using any interrupts (IRQ's). That is the max baud rate with no IRQ
intervention. If you check LOG-EQF, you'll see that you have to assign
an IRQ for rig control and for tnc operations. TR does not require it.

Good luck, Bob
KF9YH



--
FAQ on WWW:               http://www.contesting.com/trlogfaq.html
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:         http://web.jzap.com/n6tr/trwish.html


<Prev in Thread] Current Thread [Next in Thread>