Thanks for the reply.
I did the following :
I dited the S50P13DC.DOM file and I added the lines :
R1 = R1, MM1
R2 = R2, MM2
R3 = R3, MM3
After that I saved it as ARR10.dom in the log directory.
I have also included in the logcfg.dat the commands :
DOMESTIC MULTIPLIER = DOMESTIC FILE
DOMESTIC FILENAME = ARRL10.DOM
What do I have to do you log it ?.
I tried in several ways with no luck.
I tried UT5XXX/MM1, UT5XXX/MM2 and UT5XXX/MM3 and I can not enter R1, R2 or
R3 as the report. I can only enter a NUMBER and TR says it is and Ukranien
Then, I tried UT5XXX/MM and I entered R1, R2, R3, MM1, MM2, MM3 and TR logs
it correctly, but the multiplier is not maked as if it was worked (doesn´t
change the color) and if I enter the received serial number TR believes it
is the signal report. I have also tried 599 26 R3 and TR doesn´t like it.
What am I doing wrong ?
73 de Arturo, LU6ETB
De: VR98BrettGraham <email@example.com>
Para: firstname.lastname@example.org <email@example.com>
Fecha: Martes, 15 de Diciembre de 1998 09:56
Asunto: Re: [TRLog] Logging MM (multipliers)
> Does anyone remember how to log a MM station in order that TR recognizes
> it as a muliplier in the ARRL 10 Meter Test?
>The program uses S50P13DC.DOM for domestic multipliers in the ARRL 10m.
>That file does not include anything for maritime mobiles, so you must add
>yourself. I use R1, R2 & R3 for the three regions & call the new file
>FAQ on WWW: http://www.contesting.com/trlogfaq.html
>Administrative requests: trlog-REQUEST@contesting.com
>Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Administrative requests: trlog-REQUEST@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html