At 06:09 AM 5/24/1999 -0700, you wrote:
>
>> I found, some time ago, one annoying feature pertinent to
>> changing speed during CW message. If is some part going
>> different speed in message and PgUp/PgDn is pressed, then
>> speed of CW is confused.
>
>Yes - this can be a problem. However, I am not sure I can fix
>it due to the design of the program.
I have lived around it for a long time - it does not particularly bother
me, but the only time I program speed changes is during my exchange, and I
never manually change my speed at that time unless it is at the beginning
while TRlog is sending his callsign, before getting to the ^S or ^F.
If all else fails, the program tells you what the basic speed is after it
is all over, and you have chopped up only one contact at most - and even at
that you made the Q and it is now in the log. You can recover your
composure during your 73 or CQ message. No biggie.
Mark, N5OT
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|