> This is a weird one - I have my config file set up for SS CW for two
> radio mode and it's acting a little weird using Alt-D. I've put my
> LOGCFG file at the bottom. Version 6.44.
>
> Radio 1 is CQing. I enter a call with Alt-D for the second radio,
> and it appears in the upper right corner. Hit the space bar to
> send my callsign on radio 2. It does, stopping the CQ on radio 1.
> TR stays stuck on radio 2 and then does not switch to S&P mode, nor
> does it return to radio 1 and resume the CQing after my call is sent.
> The keyboard locks up, no input accepted. If I press ESC, then the
> action "completes" - the S&P window comes up with the call of the
> station I "Alt-Ded", the rig resumes CQing on radio 1 (like it is
> supposed to).
>
> Also, If I have just worked a station with Alt-D, I cannot use the
> Alt-D command again consecutively to work another station. I have
> to press ESC, then use the Alt-D command again.
>
> For some reason, I have to press ESC to complete the sequence, when
> it should be self-completing. Am I crazy or what? Anything I'm
> doing wrong in config file? It's the same one I've used for the 97
> and 98 SS contests with the earlier versions.
The config file seems okay. I have been unable to reproduce any
of the strange symptoms with either 6.44 or 6.45. I suggest the
following actions:
1. Delete your restart file (.RST) and try again.
2. Try a fresh copy of the program.
Tree
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|