Ed,
TR works fine here on my TS-950SDX. When it changes mode, it moves to the
alternate mode and on my TS-950SDX to the freq that was last used on that
band in that mode. I.E. if I'm on 7010 CW, ALT-M changes me to LSB on 7225
and another ALT-M changes me back to CW on 7010. Worked fine here for me
for SS this past weekend. This is with TR 6.44 or 6.45.
Jon Hamlet, W4ZW
Casey Key Island, FL
"A little bit of paradise in the Gulf of Mexico"
> -----Original Message-----
> From: owner-trlog@contesting.com [mailto:owner-trlog@contesting.com]On
> Behalf Of Ed Himwich/Letitia Carlson
> Sent: Wednesday, November 10, 1999 5:13 PM
> To: trlog@contesting.com
> Subject: [TRLog] TS-950SD Serial Interface
>
>
>
> I have been pretty well talked into believing that my serial problem is in
> the radio, not in TR. It works well enough that it is convincing
> that I have
> it hooked up right, but not everything works.
>
> Just for another data point: is there anyone out there with a
> TS-950SD that
> can confirm that ALT-M changes the mode in current version of TR? I tried
> 6.44, 6.45 and TR FREE all with no luck. Well some luck. About 1
> time in 20
> it works. Alt-B and ALT-V change the band reliably.
>
> 73, Ed N3HXQ
>
>
>
> --
> FAQ on WWW: http://www.contesting.com/trlogfaq.html
> Submissions: trlog@contesting.com
> Administrative requests: trlog-REQUEST@contesting.com
> Problems: owner-trlog@contesting.com
> Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
>
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|