TRLog
[Top] [All Lists]

[TRLog] No 5VDC on LPT1 Port

Subject: [TRLog] No 5VDC on LPT1 Port
From: n6tr@teleport.com (n6tr@teleport.com)
Date: 1 Dec 1999 13:34:48 -0000
> When paddle interface didn't work on Compaq Armada 4131T laptop, I checked 
> voltage between pins 14 and 25 and found nothing there.  Check of another 
> 4131T revealed the same thing, so I don't think port is defective.  Other 
> PC's I have do have the 5VDC and the paddle interface works fine.
> 
> Anyone run into something similar?  Is there some kind of setup or 
> configuration command that might affect the presence of voltage on pin 14?

Most computers will work without having this voltage.  Don't hook up
the pullup resistors and this case - and give it a try.  However, if
you hear di-dah-di-dah, that means the inputs aren't pulled up inside
your computer and you will need to come up with some voltage to do this.

I once used a 9 volt battery with some resistors to do this when I 
was down in Costa Rica.

Tree

--
FAQ on WWW:               http://www.contesting.com/trlogfaq.html
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:         http://web.jzap.com/n6tr/trwish.html


<Prev in Thread] Current Thread [Next in Thread>