[Top] [All Lists]

[TRLog] Bug update

Subject: [TRLog] Bug update
From: (Fullgraf, Chuck)
Date: Thu, 2 Dec 1999 06:45:52 -0600
To add to the confusion, I saw the jump to non-SSB and back on my Yaesu
FT920 on a fairly regular basis (regular enough to see it). It never caused
any logging or radio problems so I have not tried to "fix" it or trouble
shoot it.

Chuck, KE4OAR

-----Original Message-----
From: Pete Smith []
Sent: Wednesday, December 01, 1999 5:14 PM
Subject: Re: [TRLog] Bug update

At 08:34 PM 12/1/99 -0000, Charles Fulp wrote:
>>What exactly are the ICOM Frequency Errors?
>I might as well chime in.  I saw some of those NON ..something loggings for
>mode, and got 0 points
>until I edited them.  I thought perhaps I forgot to set the NO POLL WHEN
>or something..
>I have an IC781, and notice while transmitting I get funny band/mode
>readings but never had a
>logging problem before SS...forget which mode, but I think it was SSB.
>2 minutes to
>edit the log and rerun it, so didn't consider it a serious problem.

OK, and here I come to confuse things.  During SS, I had some weird things
happen, including watching the NONSSB mode come and go again transiently
(staying for just a second), coupled with the QSO and MULT display changing
from the full 6-band display to just the totals and back again.  It only
happened on 40 meters, and I had indications of RF in the shack, so I just
put it down to that.  I did some jumper fixing and so on, and was watching
for it in CQWWCW, and did not see either phenomenon in 2600 QSOs.

Oh, here's the confusing part - my radio is a Kenwood TS-930 with the PIEXX
board, runnig TS850 as the radio type.

73, Pete Smith N4ZR 

Sometimes a tower is just a tower

FAQ on WWW:     
Administrative requests:
Feature Wishlist:

FAQ on WWW:     
Administrative requests:
Feature Wishlist:

<Prev in Thread] Current Thread [Next in Thread>