Yes, this is a very annoying problem that is not unique to your radio or TR
version combination.
The workaround that I use is to go into RUN mode when working split.
73,
Steve, N2IC/0
-----Original Message-----
From: CarlWClawson@cs.com <CarlWClawson@cs.com>
To: trlog@contesting.com <trlog@contesting.com>
Date: Wednesday, December 29, 1999 9:24 PM
Subject: [TRLog] Disappearing call working split with bandmap
>
>I found some mention of this in the archives ca. April `96 but the
solution,
>if there is one, is not clear.
>
>I pick up a call out of the bandmap, of a station working split. I go to TX
>mode to call him in S&P but by the time I hit Enter his call has
disappeared
>from the call window so nothing is sent. This follows the usual behavior
that
>calls from the bandmap go away when you leave their frequency. I tried
>setting BAND MAP CALL WINDOW ENABLE = FALSE. This prevents calls from
popping
>into the window from the band map but doesn't prevent them from leaving it.
>The disappearance happens only if the call is a flashing band map entry.
>
>I am getting frequencies from an ICOM 735 for the band map. I'm still on
>v6.43.
>
>Thanks, Carl WS7L
>
>--
>FAQ on WWW: http://www.contesting.com/trlogfaq.html
>Submissions: trlog@contesting.com
>Administrative requests: trlog-REQUEST@contesting.com
>Problems: owner-trlog@contesting.com
>Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
>
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|