> According to the manual, you can use one LPT port for CW paddle
> input or radio switching output but not both. It would seem to
> me that this is because there is not always voltage on pin 14
> for pullup.
> My question is - can you get around this if you have another
> source of + 5 volts for pullup on pins 12 & 13?
Sure. I use one port to do both radio relay control and paddle
input - making my own pullup voltage with a +5V regulator off of
+12V.
Tree
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|