TRLog
[Top] [All Lists]

[TRLog] Foot Switch Port, Packet Port, Help

Subject: [TRLog] Foot Switch Port, Packet Port, Help
From: petvet@erie.net (Scott Johns)
Date: Wed, 31 Jan 2001 22:47:01 -0500
Hi everyone,

I'm almost ready for the big contest, but am having two hardware/software
issues to resolve.  I am using a dedicated 486 machine with dos version 6.

I have my footswitch on LPT1, which I wired onto the un-used pins inside my
top ten band decoder.  Have the footswitch set to mimic alt D dupe check.
When I engage the footswitch it takes several moments before the task shows
on the screen.  Sometimes I have to hit it a few times or hold it to get the
action.  In testing, this occurs both with or without the pull-up resistor
wired to pin 14.  Voltage on pin 14 is 5 v, and voltage on pin 15 is 5v.

For the packet port, I have a KPC3plus on serial 4.  I am able to see the
kantronics "turn on" info when I set the baud at 1200.  But not all the
letters what they should be, and the text is offset abnormally staggered
towards the right (ie. not in a nice column).  This occurs whether I use the
7 bit or eight bit setting.

Any ideas on either problem greatly appreciated.

73, Scott W3TX


--
FAQ on WWW:               http://www.contesting.com/FAQ/trlog
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:         http://web.jzap.com/n6tr/trwish.html


<Prev in Thread] Current Thread [Next in Thread>
  • [TRLog] Foot Switch Port, Packet Port, Help, Scott Johns <=