TRLog
[Top] [All Lists]

[TRLog] Help with TR Packet Cluster Configuration

Subject: [TRLog] Help with TR Packet Cluster Configuration
From: roberto.soro@sia.it (Soro Roberto)
Date: Thu, 22 Feb 2001 09:01:21 +0100
You should carefully check for the line baudrate:
TR defaults to 4800 bps. 
(while you can set to a lower speed, TR cannot go beyond that value).

PACKET PORT = SERIAL nn      (your com port number)
EIGHT BIT PACKET PORT = TRUE
PACKET BAUD RATE = 4800  (or 2400, or 1200, but not higher)

If your PK232 is set for 9600, then you have to slow down it to 4800.
Hope this helps.
GL
Bob,I2WIJ (IR2V in contest)

mailto:i2wij@qsl.net
http://www.qsl.net/i2wij/


> -----Original Message-----
> From: Dick Stepanian [mailto:w6tk@juno.com]
> Sent: Thursday, February 22, 2001 4:12 AM
> To: trlog@contesting.com
> Subject: [TRLog] Help with TR Packet Cluster Configuration
> 
> 
> 
> Hi All,
>         Question regarding packet cluster operation....I seem to be
> having trouble configuring TR correctly for packet support.  I have a
> PK232 and use it with LogPlus as well as CT and have no 
> problems, but I
> can't seem to get it configured properly for use with TR.  I 
> am sure it
> is my error.  I have looked through the manual and tried several
> variations trying to get the proper combination of commands 
> but haven't
> had any luck...so I am yelling "uncle"!  Any suggestions or 
> config file
> info would be appreciated...also is there something I am 
> suppose to do in
> addition to setting the config file up properly - like some 
> setup in the
> PK232?
> 


*******************Internet Email Confidentiality Footer******************* 
Qualsiasi utilizzo non autorizzato del presente messaggio nonche' dei suoi
allegati e' vietato e potrebbe costituire reato. Se lei ha ricevuto
erroneamente il presente messaggio, Le saremmo grati se, via e-mail, ce ne
comunicasse la ricezione e provvedesse alla distruzione del messaggio stesso
e dei suoi eventuali allegati. Le dichiarazioni contenute nel presente
messaggio nonche' nei suoi eventuali allegati devono essere attribuite
esclusivamente al mittente e non possono essere considerate come trasmesse o
autorizzate da SIA S.p.A.; le medesime dichiarazioni non impegnano SIA
S.p.A. nei confronti del destinatario o di terzi. 
SIA S.p.A. non si assume alcuna responsabilita' per eventuali
intercettazioni, modifiche o danneggiamenti del presente messaggio e-mail. 

Any unauthorized use of this e-mail or any of its attachments is prohibited
and could constitute an offence. If you are not the intended addressee
please advise immediately the sender by using the reply facility in your
e-mail software and destroy the message and its attachments. The statements
and opinions expressed in this e-mail message are those of the author of the
message and do not necessarily represent those of SIA. Besides, The contents
of this message shall be understood as neither given nor endorsed by SIA
S.p.A.. 
SIA S.p.A. does not accept liability for corruption, interception or
amendment, if any, or the consequences thereof. 



--
FAQ on WWW:               http://www.contesting.com/FAQ/trlog
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:         http://web.jzap.com/n6tr/trwish.html


<Prev in Thread] Current Thread [Next in Thread>