TRLog
[Top] [All Lists]

[TRLog] Repeatable cw messages?

Subject: [TRLog] Repeatable cw messages?
From: roberto.soro@sia.it (Soro Roberto)
Date: Wed, 21 Mar 2001 09:07:02 +0100
Hello all,
I always noticed this problem (feature?) since I started
(practically) with 6.40, so I used to stop the repeated CQ hitting ESC
and this is what I usually do automatically, before
typing the first letter of the new caller.
Anyway, during last Russian using 6.57 I found the auto-repeat
auto-restart nice and useful.
Now come to a possible side effect:
since I worked mixed mode, when I switched to SSB I had the
autoCQ running again.
Since I don't still use SBDVP nothing happened but
only to see the countdown message on the bottom line.
I'm asking: we have the way to set-up an autorepeat by Alt-Q
then to start or restart it by Alt-C.
There is no way to say: I don't want this anymore.
I looked through the manual and the Control-J menu but found nothing.
May be the same Alt-Q followed by something different from Fx will do this?
Say Alt-Q Alt-K 
To me this was annoying, for the SSB side effect mainly, but
I would like to be able to reset this feature, 
without exiting TR, anyway.
Have a good day!

Bob,I2WIJ (IU2M in WPX contest)

mailto:i2wij@qsl.net
http://www.qsl.net/i2wij/


> -----Original Message-----
> From: Clive Whelan [mailto:clive_whelan@btinternet.com]
> Sent: Tuesday, March 20, 2001 9:42 PM
> To: TRLog Mailing List
> Subject: Re: [TRLog] Repeatable cw messages?
> 
> 
> 
> 
> > this was happening to me with previous versions but not every
> > time.
> >
> 
> 
> I am sure Udo and Jan are correct, but I have to say it *never* 
> happened to me before using a Pentium 200 in pure DOS mode. In 
> 6.57 it happens too often for comfort, and then the responding 
> station naturally wants to correct his call and the whole thing 
> goes pear shaped!
> 
> I know Tree understands the problem, but for the moment I have 
> no option but to revert to v6.56 I think
> 
> 73
> 
> Clive
> 
> GW3NJW
> 
> 
> 
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/trlog
> Submissions:              trlog@contesting.com
> Administrative requests:  trlog-REQUEST@contesting.com
> Problems:                 owner-trlog@contesting.com
> Feature Wishlist:       http://web.jzap.com/n6tr/trwish.html
> 


*******************Internet Email Confidentiality Footer******************* 
Qualsiasi utilizzo non autorizzato del presente messaggio nonche' dei suoi
allegati e' vietato e potrebbe costituire reato. Se lei ha ricevuto
erroneamente il presente messaggio, Le saremmo grati se, via e-mail, ce ne
comunicasse la ricezione e provvedesse alla distruzione del messaggio stesso
e dei suoi eventuali allegati. Le dichiarazioni contenute nel presente
messaggio nonche' nei suoi eventuali allegati devono essere attribuite
esclusivamente al mittente e non possono essere considerate come trasmesse o
autorizzate da SIA S.p.A.; le medesime dichiarazioni non impegnano SIA
S.p.A. nei confronti del destinatario o di terzi. 
SIA S.p.A. non si assume alcuna responsabilita' per eventuali
intercettazioni, modifiche o danneggiamenti del presente messaggio e-mail. 

Any unauthorized use of this e-mail or any of its attachments is prohibited
and could constitute an offence. If you are not the intended addressee
please advise immediately the sender by using the reply facility in your
e-mail software and destroy the message and its attachments. The statements
and opinions expressed in this e-mail message are those of the author of the
message and do not necessarily represent those of SIA. Besides, The contents
of this message shall be understood as neither given nor endorsed by SIA
S.p.A.. 
SIA S.p.A. does not accept liability for corruption, interception or
amendment, if any, or the consequences thereof. 



--
FAQ on WWW:               http://www.contesting.com/FAQ/trlog
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:         http://web.jzap.com/n6tr/trwish.html


<Prev in Thread] Current Thread [Next in Thread>