Using old KAM here and have never had any problems.
I have the following:
PACKET PORT = SERIAL 3
EIGHT BIT PACKET PORT = TRUE
PACKET BAUD RATE = 4800
PACKET BEEP = FALSE
PACKET SPORTS = ALL
PACKET SPOT EDIT ENABLE = FALSE
PACKET RETURN PER MINUTE = 5
----- Original Message -----
From: "Larry Menzel" <email@example.com>
Sent: Friday, March 01, 2002 3:24 PM
Subject: [TRLog] Kantronics Issue???
> Hello listers:
> I spoke both with George and with Kantronics on the issue of one way
> communications from my KPC 3 to Trlog and back.
> First: Will someone who is using a KPC 3 with Trlog please email me with
> the parameters they are using to make it work?
> Second: Kantronics tech support says the KPC 3 is looking or a <CR> ONLY
> the end of a line, and I see no switches in
> Trlog that enable just a CR at the end of a line. I see LF but the TNC is
> not looking for that.
> Does enabling a LF at the end of the line turn off a CR?
> My KPC 3 works fine with every other program including hyperterm.
> Tree...what's up? Any suggestions?
> Bamboozled, again.
> Contest starts in 3.70 hours...help.
> Larry, N0XB
> TRLog mailing list