That function does not work on ICOM because there is no INCREMENT RIT
function in the CI-V command set. Of course, the 756 Pro has the new
extended commands so it may have it now, but last time I looked at the 756
Pro command set, I did not see it (or Clear RIT).
Tom NY4I
----- Original Message -----
From: "Ben Wilbanks" <benw01@earthlink.net>
To: <trlog@contesting.com>
Sent: Friday, June 28, 2002 10:49 AM
Subject: [TRLog] 756PRO II Computer Interface
> I just bought an optoelectronics CI-V conversion box to interface my '756
to
> my computer via the serial interface. I set the address of the radio to
100
> (decimal) in the logcfg.dat file. I also set the radio type as
IC765PROII.
> I'm using TR6.68. As far as I can tell, things look ok as far as tracking
> the frequency/band either with the computer or the radio with one
exception.
> The shift keys don't change the frequency of the radio. And I haven't
> gotten the RIT function working. Am I missing something in the config
file
> or somewhere else?
>
> Thanks for your comments and help...........Ben KA6R
>
> _______________________________________________
> TRLog mailing list
> TRLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>
|