TRLog
[Top] [All Lists]

[Trlog] CW mode, Dits and Dahs

Subject: [Trlog] CW mode, Dits and Dahs
From: wa4et at hotmail.com (David Price)
Date: Thu Apr 24 10:34:04 2003
Tree

Well the fix was 10K resistors, works A OK now. If I had read the detail for 
the pins on pages 181 and 182, I would have caught the fact that 10K was the 
suggested value, not the 1K I had origally used

A suggestion would be to include a blowup on page 182 to include that 
circuit with the 10k resistors visable like the two alreay shown. The 
diagram on page 183 could also be inproved, as trying to actually read the 
diagram, witch how I build most things, leave the resistor values hidden in 
a blurr or scanned fuzz

THanks for everybodies feedback


David





>From: Tree <tree@kkn.net>
>To: David Price <wa4et@hotmail.com>
>Subject: Re: [Trlog] SLOW CW in F10 type CW mode, Dits and Dahs
>Date: Tue, 22 Apr 2003 16:45:33 -0500
>
>On Tue, Apr 22, 2003 at 08:39:41PM +0000, David Price wrote:
> > Tree
> >
> > With the key unpluged, it does it all the time,, but I believe that is
> > normal when the plug is unpluged because of no pullup resistors
> >
> > when the key plugged in, it stops making the alternate Dit and Dahs.
> >
> > When I then try to make Dits ......or..... Dahs, it I get altenateing 
>Dit
> > and Dahs on either side od the Paddel
> >
> > I made the plug using 1K pull-up resistors Pins 12 and 13 to pin 14, 
>ground
> > on 25, that being the common for the key.  I have also taken ie apart to
> > check for shorts.
>
>Check to make sure the pullup voltage on pin 14 isn't getting pulled down
>when you close one contact.  Might have to use higher impedance resistors.
>
>Tree


_________________________________________________________________
MSN 8 with e-mail virus protection service: 2 months FREE*  
http://join.msn.com/?page=features/virus

<Prev in Thread] Current Thread [Next in Thread>
  • [Trlog] CW mode, Dits and Dahs, David Price <=